Mustang® Biogas Sample Conditioning System

 The Mustang® Biogas Sample Conditioning System is designed to deliver a representative gas sample from an anaerobic digester. The raw gas is dried, heated, and pressurized for delivery to an analyzer(s) utilizing a Mustang Sample Conditioning System. 

The Mustang Biogas Sample Conditioning System transports the biogas sample at a temperature well above its dewpoint, which is maintained throughout the final pressure reduction process, for analysis. 

Features

  • Patented technology delivers a heated sample to the analytical device utilizing existing power supplied by electric heat trace tube bundle
  • Rated for Class 1, Division 2, Group D locations
  • Integral analyzers for CH4, H2S, Total Sulfur, O2, H2O, and N2
  • Stainless Steel or Painted Freestanding Enclosure- Insulated
  • Cabinet Heater with Thermostat Control
  • AC Junction Box Mounted on Exterior of Enclosure
  • All Rigid Conduit
  • Wiring Terminated to Exterior Junction Box for Easy Field Install
  • Tubing and Fittings are 316SS

Benefits

  • Removes free liquids from saturated gas streams
  • Sample Booster Pump to Increase Sample Pressure to Adequate Analyzing Pressure
  • Highly customizable
  • Conforms to the API Manual of Petroleum Measurement Standards chapter 14.1

Specifications

Gas Sample Operating Pressure 5.0 psig (1.358 BAR)
Type Z purge for dryer enclosure. Sample at minus pressure available upon request.
Maintains Sample Gas Standard set point at 120ºF (49º C)
Adjustable from 60-400ºF (16-204ºC)
Electrical Classification Class 1, Division 2, Group C & D
Construction Stainless Steel or Painted Freestanding Enclosure- Insulated
Wetted Parts 316 SS
Input Supply Voltage 115 VAC, 960 Watts, 50/60 Hz, ± 10%
240 VAC, 960 Watts, 50/60 Hz, ± 10%
24 VDC, 960 Watts, 50/60 Hz, ± 10%

Literature