NGL Products

Mustang® Liquid Sample Pump

  • MLSP

    MLSP

    View post

The Mustang® Liquid Sample Pump (MLSP) is a patent pending system offering accurate and repeatable process control measurement for NGL applications. Sample pressure is increased to meet analyzer requirements and complete the transition to liquid phase in dense phase tower bottom streams.

The MLSP allows for the use of a liquid return to process speed loop when sample point pressures are equal to or less than return point pressures.

A completely pneumatic system eliminates the need for electrical classifications removing timely design processes and restrictions for installation. The MLSP becomes an integral component of a complete sampling system for problematic processes such as cryogenic tower bottoms.

  • Analytically Accurate® Technology
  • Patent pending
  • Changes sample vapor to liquid
  • Speed loop return
  • Pneumatic system
  • No need for electrical classification
  • Teflon composite seals

Maximum discharge pressure1750 PSI (121 BAR)
Max Volume8.71 LPH
Strokes per minute1-45
Stroke size1-3.2 cc
Max actuation air consumption1150 SCF per day @ 100 PSIG (7 BAR)
Wetted materialsStainless Steel

Mustang Vaporizer

  • MV

    MV

    View post

The Mustang® Vaporizer is designed for flash vaporization of sample liquids in petrochemical plants, refineries, gas plants, & for vaporizing cryogenic liquids.

Sample liquid is maintained below its bubble point pressure and temperature until it enters the flash chamber where it is instantaneously vaporized. Heat for vaporization is transferred from an electrical cartridge heater to a low volume flash chamber having a very large heat transfer surface area.

The flash chamber is designed to maintain a homogeneous sample vapor that is representative of the liquid sample composition. The Mustang® Vaporizer has five times more heat transfer capacity than vaporizing regulators.

  • Analytically Accurate® Technology
  • ATEX/IEC Ex Certified
  • cETLus Certified
  • CRN Approved
  • Thermal cutoff
  • Versatile conduit connections
  • Integral heater and controller
  • Heater cartridge does not contact sample fluid
  • Large heat transfer capacity
  • Liquid bypass
  • Uniform liquid flash vaporization
  • No premature flashing or partial fractionation
  • Discrete hot and cool zones
  • Integral flow restrictor on inlet
  • Compatible with Mustang® Intelligent Vaporizer for LNG

 

Maximum allowable working pressure
3500 psig (241.3 bar)
Proportional temperature control range
95-200ºF (35-94ºC) (other ranges available upon request)
Thermal cut-off
Normally opens at 230ºF (110ºC) (other ranges available upon request)
Internal volume
40 cc
Port sizes
1/4” female NPT
Conduit connection
3/4” female NPT
Electrical enclosure classification
Class 1, Div 1 & 2, Groups B, C, D
Power rating options115 VAC, 375 Watts, 50/60 Hz, ± 10%
208 VAC, 375 Watts, 50/60 Hz, ± 10%
230 VAC, 375 Watts, 50/60 Hz, ± 10%
Wetted materials
Machined parts: 316 stainless steel/NACE compliant
All other metal parts: stainless steel/NACE compliant
O-ring: Viton® (other materials available upon request)

Mustang® Pressure Regulating Vaporizer Sampling System

  • MPRVSS

    MPRVSS

    View post

The Mustang® Pressure Regulating Vaporizer Sampling System (MPRVSS or NGL Sr.) is a technology designed to vaporize liquid providing a fresh sample to a continuous online analyzer.

This system is designed with enhanced sample quality, through controlled vaporization and remixing, and gas sample pressure reduction.

In order for the analyzer to meet it’s stated accuracy, the Mustang® Pressure Regulating Vaporizer Sampling System ensures the sample to the analyzer is in a stable composition. The single-path design is suitable for sample conditioning where redundancy is not a concern.

  • Analytically Accurate® Technology
  • cETLus Certified
  • Patented Technology
  • Continuous gas flow design eliminating post-vaporization hydrocarbon liquid dropout
  • Accurate and reliable representative sample for your GC
  • Installs at gas stripping facilities and where heavier hydrocarbon measurements are required

Maximum allowable working pressure
6000 psig (414 bar)
Proportional temperature control range
0ºF-300ºF (-18ºC-148ºC)
Port sizes
1/4” female NPT
Conduit connection
3/4” female NPT
Electrical enclosure classification
Class I, Div I, Group C, D, T3
Port sizes
1/4” female NPT
Power rating options
115 VAC, 815 Watts, 50/60 Hz, ± 10%
208 VAC, 815 Watts, 50/60 Hz, ± 10%
230 VAC, 815 Watts, 50/60 Hz, ± 10%
Wetted materials
Machined parts: 316 stainless steel/NACE compliant
All other metal parts: stainless steel/NACE compliant; (other materials available upon request)

Mustang® Pressure Regulating Vaporizer Sampling System Jr.

  • MPRVSS JR

    MPRVSS JR

    View post

The Mustang® Pressure Regulating Vaporizer Sampling System Jr. is a technology designed to vaporize liquid providing a fresh sample to a continuous online analyzer where economy is of priority.  The MPRVSS Jr. (or the NGL Jr.) has the controller located within the cabinet and no liquid block.  For external controller features and added liquid block, see MPRVSS.

This system is designed with enhanced sample quality, through controlled vaporization and remixing, and gas sample pressure reduction.

In order for the analyzer to meet it’s stated accuracy, the Mustang® Pressure Regulating Vaporizer Sampling System ensures the sample to the analyzer is in a stable composition. The single-path design is suitable for sample conditioning where redundancy is not a concern.

  • Analytically Accurate® Technology
  • cETLus Certified
  • Patented Technology
  • Continuous gas flow design eliminating post-vaporization hydrocarbon liquid dropout
  • Accurate and reliable representative sample for your GC
  • Installs at gas stripping facilities and where heavier hydrocarbon measurements are required

Maximum allowable working pressure
6000 psig (414 bar)
Proportional temperature control range
0ºF-300ºF (-18ºC-148ºC)
Port sizes
1/4” female NPT
Conduit connection
3/4” female NPT
Electrical enclosure classification
Class I, Div I, Group C, D, T3
Port sizes
1/4” female NPT
Power rating options
115 VAC, 590 Watts, 50/60 Hz, ± 10%
208 VAC, 590 Watts, 50/60 Hz, ± 10%
230 VAC, 590 Watts, 50/60 Hz, ± 10%
Wetted materials
Machined parts: 316 stainless steel/NACE compliant
All other metal parts: stainless steel/NACE compliant; (other materials available upon request)

SoftView® Monitor Software

  • View post

The Mustang Intelligent Vaporizer Soft View® Monitor is a suite of programs to monitor for LNG monitors vaporizer temperature, pressure and flow rates, and their effects on the GC analysis.  All products in the suite include the ability to interface locally and remotely to the wide array of smart Mustang Sampling instrumentation.

Soft View® Monitor allows auto polling of the heater controller and gas chromatograph, user set-point control of the heater and flow controller, monitoring of the GC and heater alarms, and optional customized AI, AO, DI, DO interface to other sensors.

With exporting capabilities, Soft View® Software Monitor develops compatible reports of LNG data for review and analysis with programs such as MS Excel.

  • Analytically Accurate® Technology
  • Windows XP, Windows 7, Windows 8
  • Easy to use smart interface to the Mustang Sampling LNG vaporizer and associated GC instruments.
  • History & real-time date trending of vaporizer during load/offload
  • Load definition management with report spread sheets for vaporizer and LNG data
  • Concurrent Interface up to 5 Vaporizers and Multiple GC Streams.
  • RS232, RS485, or IP Interface to Vaporizers for Monitoring and Upload of Reports and Logs

 

Windows XP, Windows 7, Windows 8 Compatible

Back to top